Tillotson Construction kicks off the 1950s with ubiquitous designs

Albert City, Iowa, ca. 1954

Albert City, Iowa, circa 1954.

Story by Kristen Cart

In the last post we studied the oddball Tillotson elevators that sprouted during the 1940s, the most creative period of elevator design. It was a time of multiple plans and innovations, and as the 1950s dawned, unworkable plans were dropped and popular designs emerged.

A surprising number of elevator ideas survived however, some with new names, as the Tillotson brand retained its distinctive features. Advances in engineering dominated the 1950s as elevator styles settled into lines that typified their makers.

DSC_0732-1

Dallas Center, Iowa. Photo by Kristen Cart.

You can generally spot a Tillotson elevator by its rounded headhouse. Other subtle details are also telling trademarks. These style points became so common because a large portion of Tillotson’s building in the 1950s followed established designs, tweaked here and there for individual customers, without deviating greatly from the most popular plans.

We will examine the first of these enduring plans, which crossed over from the late 1940s, in this post.

Flagler by Gary Rich

Photo by Gary Rich.

Dike Plan:

This design was rolled out in 1947 with the elevator at Satanta, Kan., which had a 250,000-bushel capacity. No corresponding Dike, Iowa elevator is mentioned in our records, but presumably it was built (although I speculate whether the original Dike proposal sat on a desk without ever being approved, while Satanta’s updated elevator proceeded, thus the naming convention).

DSC_0638

Photo by Kristen Cart.

The basic Dike elevator, with 252,000-bushel capacity, was built at Randall, Iowa (1949); West Bend, Iowa (1949); Pocahontas, Iowa (1949); Bushland, Tex. (1950); Pond Creek, Okla. (1950); Seibert, Colo. (1950); and Flagler, Colo. (1950). They all look like the typical Tillotson elevator, but with a larger-than-usual rounded headhouse.

The Satanta, Kan. (1947), and Gruver, Tex. (1947) elevators were built with a revised Dike plan, which was renamed the Satanta plan. They could be filled to a capacity of 250,000 or 265,000 bushels, respectively–the two elevators differed by five feet of draw-form height. Springfield, Colo. (1948); and Kildare, Okla. (1950); were also built with 250,000-bushel capacity using the Satanta (variously named Dike) plan.

The Pocahontas, Iowa, elevator, built using the Dike plan, got its own plan designation also. Into the mid-’50s, several elevators were built using the Pocahontas plan specifications: Albert City, Iowa (1954); Goldfield, Iowa (1954); Rockwell City, Iowa (1954); Thornton, Iowa (1955); and Dallas Center, Iowa (1955). Each could hold 252,000 bushels of grain.

Pocahontas, Iowa

Pocahontas, Iowa. Photo by Kristen Cart.

Because we are missing a page of the specifications for elevators built in 1954-1955, we do not know whether other elevators followed this plan, though I suspect some did.

The Tillotson Construction Company of Omaha continued to build for at least four years after our records ended. But reconstructing those records is a project for another time. In the next post, we will look at the Churdan and Jackson plans that originated in the late 1940s.

 

2 comments on “Tillotson Construction kicks off the 1950s with ubiquitous designs

  1. Virginia R Slusher says:

    Those are the years I was busy sendng out information cards to elevators all over the midwest,I was the “office gir/slash receptionist for 7 years. Really enjoyed working there, so good to me.

  2. Suzassippi says:

    I love this design! The 1954 shot is incredible–it is so Art Moderne looking.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s